What are Wall Mounted Heater Guards?
Wall mounted heater guards are wire mesh guards that are fitted onto existing heaters to prevent children and vulnerable adults from burning themselves on heaters through prolonged contact.
A low cost alternative to radiator covers, the heater guards are not only an effective safety measure but allow air to circulate freely so you do not lose the heating benefits from having your heaters on.
In order for us to be able to provide you with a quotation we first need you to measure your heaters to provide accurate measurements.
Height: Measure from the top to the bottom of the radiator – NOT to the floor.
Width: Measure the widest point of the heater.
Depth: Measure the deepest point of the heater from the wall.
Get a Free Quotation
Click here to choose a product
Wall Mounted Heater Guard
Wall Mounted Heater Guard with Sloping Top
How do Wall Mounted Heater Guards Work?
Wall mounted heater guards simply fit over your heaters and are attached to the wall. Made from 1 inch square mesh to eliminate the risk of finger trapping the guards are coated in a plastic coating to safeguard any sharp edges.
The gaps in the mesh allow air to circulate freely so that you still get the maximum heat from your radiators but the heater guards do not absorb the heat so they are safe to touch.
For enhanced safety, strengtheners are fitted inside each guard, acting as a spacer between the heater and the guard reducing any heat transfer.
The guards are designed to cover the heater completely while allowing the electric cable to pass safely through the mesh to the power source.
Bespoke Wall Mounted Heater Guard Options
Our wall mounted heater guards are designed to allow easy access to your access controls, with an added option of a cut out around the controls or a hinged flap.
Another popular add-on that many of our customers request is a sloping top. Sloping tops prevent items being stacked on top of the guards, which would act as a barrier to air flow and also stops debris settling on top of the guards.
The heater guards are made from 1″ (25mm) aperture square wire mesh that is coated in white plastic as standard. Inch squre mesh is used as standard because it also means fingers can not get trapped inside.
Finished in plastic coating that does not absorb heat and is soft to touch without any sharp edges.
Flat top (also available with sloping top to eliminate the possibility of items being stacked and the accumulation of debris on top of the heater guards.)
Easy Maintenance and Cleaning
The ‘hook on’ design allows the guard to be removed by loosening the screws for easy access to carry out maintenance and cleaning.
All sizes catered for (Please contact us for any bespoke requirements)
Internal fixings on all sides.
Our guards can feature a cut out or access flap so that you can gain access to your heater’s control. At the point of manufacture we will confirm the location of your controls to make sure the guards are cut to your specification.
A standard clearance of 160mm (H) x 160mm (W) x 80mm (D) will be applied.
Colour Options Available
Manufactured in a range of colours at no extra cost to match the interior of your room. (non-standard colours will be incur an additional charge).
Radiator Guard orders are manufactured to your requirements so typically will arrive within 2-3 weeks from the order date.
If you need them more urgently, please call our team at Head Office, who will endeavour to meet your requirements.