What are Floor Standing Heater Guards?

Floor Standing Heater Guards
Heater Measuring Image

Floor standing heater guards are wire mesh guards that are fitted onto existing heaters to prevent children and vulnerable adults from burning themselves on heaters through prolonged contact.

A low cost alternative to radiator covers, the floor standing heater guards are not only an effective safety measure but allow air to circulate freely so you do not lose the heating benefits from your heaters.

In order for us to be able to provide you with a quotation we first need you to measure your floor standing heater guards to provide accurate measurements.

Height: Measure the height of the heater. (From floor to the top.)

Width: Measure the width of the heater.

Depth: Measure the depth of the heater. (From the wall to the front.)

Download the Floor Standing Heater Guard Measuring Sheet>>>

Please note: A standard clearance of 80mm (H) x 160mm (W) x 80mm (D) will be applied to your measurements to manufacture the finished guard unless requested otherwise.

Get A Free Quotation

Select a Product

Click here to choose a product



 

Choose Options
Please select a product first.

2. Review Your Quote Items

Product

Actions

3. Fill in your details to see your quote!

Floor Standing Heater Guards

How do Floor Standing Heater Guards Work?

Floor standing heater guards simply fit over your heaters and are attached to the wall. Made from 1 inch square mesh to eliminate the risk of finger trapping the guards are coated in a plastic coating to safeguard any sharp edges.

The gaps in the mesh allow air to circulate freely so that you still get the maximum heat from your heaters but the heater guards do not absorb the heat so they are safe to touch.

For enhanced safety, strengtheners are fitted inside each guard, acting as a spacer between the radiator and the guard reducing any heat transfer.

The heater guards are designed to cover your electric heaters completely yet still allows the electric cable to pass safely through the mesh to the power source.

Heater Guard Access Flaps

Bespoke Floor Standing Heater Guard Options

Our floor standing heater guards are designed to allow easy access to your controls, so you can specify whether you would like a simple cut out or a lockable access flap to be added to your guards.

Another popular add-on that many of our customers request is a sloping top. Sloping tops prevent items being stacked on top of the guards, which would act as a barrier to air flow and also stops debris settling on top of the guards.

Material
The heater guards are made from 1″ (25mm) aperture square wire mesh that is coated in white plastic as standard. Inch squre mesh is used as standard because it also means fingers can not get trapped inside.

Finish
Finished in plastic coating that does not absorb heat and is soft to touch without any sharp edges.

Top Design
Flat top (also available with sloping top to eliminate the possibility of items being stacked and the accumulation of debris on top of the heater guards.)

Easy Maintenance and Cleaning
The ‘hook on’ design allows the guard to be removed by loosening the screws for easy access to carry out maintenance and cleaning.

Sizes
All sizes catered for (Please contact us for any bespoke requirements).

Fixings
Internal fixings on all sides.

Control Access
Our guards can feature a cut out or access flap so that you can maintain access to your controls. Please advise on your preference at the point of quotation.

Clearance
A standard clearance of 80mm (H) x 160mm (W) x 80mm (D) will be applied.

Colour Options Available
Manufactured in a range of colours at no extra cost to match the interior of your room. (non-standard colours will be incur an additional charge).

Warranty
12 Months

Delivery Times
Radiator Guard orders are manufactured to your requirements so typically will arrive within 2-3 weeks from the order date.

If you need them more urgently, please call our team at Head Office, who will endeavour to meet your requirements.